Decoration Guide: an expert for your detailed explanation of the three major doubt to heat the floor.

<p> Recently, the "ground-floor radiant heating standard" has been introduced, the relevant standard in the warm heat, floor coverings, and product selection has a corresponding provision. .But for consumers, the market for material, thickness, pavement, bedding and other areas there is more or less misleading propaganda, so before buying, to avoid those "man-made," the doubts. .</ P> <P> <P> <p> doubts I: solid wood flooring can be used to heat up </ p> <p align="center"> </ p> <p align="center"> solid wood flooring can be used .to heat up </ p> <p> recently, consumers in the selection of floor, Mr. Wang, the salesman told him, oak solid wood flooring material hardness that only big enough, can be used for geothermal environment. .Friends of the brand world and the other floors directly hit the "geothermal King" - the real heat of pure solid wood flooring resistance to a huge billboard. .Brochure describes the floor after a "unique high-temperature pyrolysis process technology" to solve the traditional solid wood flooring in the geothermal environment deformation, easy to crack the problem, and the thermal efficiency is greater than 8 ℃ / h, reaching .national standards, they are able to fully use the geothermal environment. .</ P> <p> Mr. Wang said that for the pure solid wood flooring is also used to heat the floor feel doubt, such as pure solid wood flooring is more easily deformed? .</ P> <p> special treatment experts say can be used </ p> <p> Chinese Forestry Industry Association Expert Committee Wang Jun, due to thermal environment, the floor needs to withstand some heat, when the water is absorbed in the air .to the timber, the timber will produce expansion; air is dry, the wood moisture evaporation, shrinkage of wood produced. ."Ordinary solid wood floors easy to crack contraction joint, can not be used for geothermal environment. ."Can be applied to the geothermal environment of pure solid wood flooring must be specially treated. .There are two ways: high-temperature carbonization, the floor of the billets is about 160 ℃? 230 ℃ under the conditions of high temperature heat treatment, the wood moisture functional decline or the humidity of the air becomes less sensitive; closed timber full with paint, which uses .Paint the outer surface of exposed wood, including back, I stand so close together, to avoid wood in contact with air to eliminate the influence of humidity on the floor. .</ P> <p> if the pure solid wood flooring for geothermal environment, once installed, the floor to try to prevent repeated installation of the floor caused the floor during the closed lock at the coating damage, so the floor with the air humidity deformation. .Also, check the ground before installation is smooth, convex if the sand to get rid of, causing moisture to prevent the sand floor of the moisture-proof film and coating damage. .</ P>.