With the international economic environment changes, the way domestic wood raw materials prices soar, rising production costs, the flooring industry is facing unprecedented cost pressure. Some enterprises to compress costs, shoddy, to bad to charge you, such as the production of two-color plates, transfer Board, veneer and thin backplane and short-lived Board (hereinafter referred to as "ghost" products).
Chinese flooring industry after many years of development, brand building, production processes, technical quality has a larger change. Especially in a Group stresses quality and integrity of the brand companies along with the entire floor market environment has dramatically improved. However, with the international economic environment changes, the way domestic wood raw materials prices soar, rising production costs, the flooring industry is facing unprecedented cost pressure. Some enterprises to compress costs, shoddy, to bad to charge you, such as the production of two-color plates, transfer Board, veneer and thin backplane and short-lived Board (hereinafter referred to as "ghost" products).
"Ghost" products are those looks like solid wood flooring, but due to the product specification for non-compliance of the quality of products prone. Tore "ghost" camouflage veil, it is easy to find them and the essential difference between solid wood flooring: genuine solid wood flooring is in the use of timber core materials processing floor coating paint directly on the production of high-quality flooring, and "ghost" of the floor is used in a variety of camouflage means production of poor quality flooring, or poor-quality wood veneer, affixed or have insect eyes, wood stains and other defects on the surface a pattern by transfer "facelift", or with different length of short-Board through concatenation. Due to the existence of the "natural" products, liable to occur after leading paving arch, deformation, cracking, fracture, and other phenomena, or the use of large amounts of binder causing household not environmentally friendly.
Consumers buy flooring products how to avoid "ghost" meet? one is to use as possible, large brand flooring brand production and management are norms. Second, it is not just for the sake of cheap. As the saying goes: "one price for what you pay for. "When a floor price and market-bit larger differences, consumers have to remain rational consumption. The third is to carefully observe the product features, contrast texture or sawing the inherent quality of floor look. "Ghost" of the surface and the floor has a large gap within, through the comparison of the methods stated.
1. double color: timber sapwood and core materials transfer of part of the solid wood materials, floor surface through the use of color finishing or special color cosmetic treatment to eliminate the sapwood and the color difference between the core material, to act as a high-quality wood flooring sales deceiving consumers. Due to the sapwood and core materials gas stem density, moisture content, wood hardness, easily lead to floor camber, deformation, cracking and other quality issues.
Identification: the floor surface sanding or sawing see end after the floor will show a very severe color difference.
2. the interposer board: some tails, pallet and different lengths of wood floor plate through a concatenation of joint technology and act as a pure solid wood flooring sales deceiving consumers. This type of floor due to the use of a large number of adhesive mosaic, formaldehyde content higher than environmental protection, and because the floor is not internal stress easily lead to deformation, cracking.
Identification: longitudinal sawing or sanding visible finger marks.
3. veneer: in poor quality solid wood substrates labelled 0.05mm — mumupi 2mm thickness is to serve as a pure solid wood flooring sales deceiving consumers. The floor was selected from poor substrate causing inconsistent quality, and use the adhesive will Flake and inferior wood pressed together, easily Flake and substrate split off and there is a certain amount of formaldehyde content not environmentally friendly.
Identification method: through the comparison of observation floor surface and underside are distinguished, solid wood flooring surfaces and surface of the wood are basically the same, and veneer is entirely different.
4. transfer plate: in areas such as insect eyes, spotted, the plants point, crack more serious bad wood, through the transfer process is printed on all kinds of solid wood, hide, insect eyes, spotted, the plants, wood defects such as cracks, to serve as a solid wood flooring sales deceiving consumers. Transfer printing plate is the use of an inferior grade b, floor substrate made of wood quality, wood grain, like laminate flooring, at the same time, due to the paint surface coating operations rarely leads to paint easy peeling, cracking.
Identification: can be distinguished on the surface of wood, wood flooring, wood grain natural wood grain transfer printing plate surface are the same, basic no chromatic aberration, back and front of the wood are completely different.
5. the short-lived plate: wood flooring is a production process requires high, has a certain technical content of modern industrial products, some enterprises because of their unconditional adhesion to paint, paint surface hardness and so can not reach the national standard, especially moisture control, causing the floor surfacing in a very short period of time will appear deformed, paint peeling, don't scratch the surface.
No comments:
Post a Comment