Decoration tips: Do not blindly old house renovation removed the old floor.

<p> second-hand housing continues to heat up as the second-hand housing decoration has become a hot, floor renovation, refurbishment and other decoration stone fire ways up. .Low cost because floor renovation, and many owners of second-hand housing intended to house all the renovation of the old floor. .However, according to experts, only the surface layer thickness of 4 mm solid wood flooring, engineered flooring and bamboo flooring can be renovated. .In addition, the floor will result in partial renovation of differences between the old and new, so the consumer can not be blind to the floor refurbishment. .</ P> <P> <P> <p> thickness of the floor surface requirements </ p> <p> floor renovation is carried out through the polished surface of the floor, putty, paint, wax polish, such as the resumption of the old floor .new. .And re-purchase of the floor compared to the old floor adapted to the indoor environment, better stability, renovation costs should be much cheaper. .</ P> <p> but according to experts, not all of the floor can be renovated. .Flooring surface layer of aluminum oxide wear layer, renovation would destroy the wear-resistant layer of the floor, resulting in increased aging of the floor, so the flooring can not be refurbished. .Only the surface layer thickness of 4 mm solid wood flooring, engineered flooring and bamboo flooring can be renovated. .Because the surface after a few polished floors, will be grinding out 1-2 mm, if the floor surface is too thin, it will polish out of the middle layer, thus affecting the floor of life. .</ P> <p> attention to monitoring the quality refurbished </ p> <p> floor renovation company is currently very little specifically to carry out this business, mostly cleaning company. .To ensure the quality of the floor renovation, advised consumers to ask the professional supervision of staff to supervise construction. .</ P> <p> floor renovation into polished, putty, paint, painting, waxing polishing five steps. .Grinding, the grinding machine should be followed using a 40 mesh, 80 mesh and a 120 sandpaper (mesh the greater the smaller the particle sandpaper, sanding scratches left by the more obvious) polished three times, and then leveling the floor putty, and then again .the floor to paint or color processing. .Since wood is a natural surface texture, can not change the color, the floor can only adjust the color depth. .</ P> <p> should be moved out of the house before the renovation of all items, painted the house clean and dust-free guarantee. .Generally need to brush paint the floor again, twice finish. .Polished surface of the floor if there are defects after, it is necessary according to the situation several times more than paint brushes. .Once completely dry before paint brush again under the paint. .So floor renovation will take about 4 days. .</ P> <p> partial renovation of ineffective </ p> <p> on the floor of a room is better for the overall renovation, the basic effect can reach a new floor, but the partial renovation of the floor it will cause differences between the old and new ., floor longer service life, the more obvious differences between the old and new. .</ P> <p> damage, mildew and deformation of the floor may not be renewed. .Floor mildew usually deep within the floor, the floor polished surface still have moldy spots; floor deformation and damage can not be remedied by sanding. .If only a small part of the floor in damage, mildew and deformation, the floor can be replaced with the color number. .No. If you do not floor the same color, select color similar to the floor, and its color and the vintage treatment to minimize the chromatic aberration. .If most of the floors have been damaged or that there is mildew, deformation, proposed to re-purchase. .</ P>.