Sunday, April 3, 2011
Flooring solid wood flooring should pay attention to common sense there are five major taboo.
<p> According to statistics, solid wood flooring problems in actual use, over half of the result because of improper laying of only 5% were related to the quality of the floor itself. .Can be seen, reasonable or not is the process of laying the floor using the results of the most important factor. .Experts advise owners to avoid the following error laying method. .</ P> <P> <P> <p> the ground is not level: the ground floor and cause some uneven keel vacant, the sound will be issued when the stampede. .</ P> <p> keel is not moisture-proof: not dry moisture content of wood keel is usually about 25% of qualified wood flooring is generally 12% moisture content, humidity worse than the General Assembly to make wood flooring quickly absorb moisture, causing the floor .bagging, paint burst. .</ P> <p> too loose or too tight: With the changes in temperature and humidity environment, wood flooring will expand or contract. .Therefore, in laying the floor, using the workplace environment should be based on temperature and humidity level to rationalize the assembled wood floor tightness. .If too loose, the floor will shrink to a larger gap, tight, floor expands to bagging. .</ P> <p> fixed with nails: nail the construction used to play plus a fixed way wedge, wedge and nail will cause the contact surface due to too small leaving insufficient nail holding power is very likely to loose wood keel ., stepped on the floor when the sound occurs. .</ P> <p> works cross: the first paved floor construction and other construction on the floor, which is now common practice in the decoration team. .But this, after laying on the floor, often need to go through a month or even longer to polish paint. .During the floor with the surrounding environment, water and gas, chemicals, without any isolation measures, is likely to lead to a sharp wood flooring moisture content changes due to deformation and cracking. .</ P>.
Labels:
[:]
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment